Last week we proceeded to stamp on a kitchen countertop in a private home, as a preventive treatment against possible staining caused by everyday use. We used the impregnating sealer Dry-Treat, Porcelain Sealer , due to its high penetration, and the requirement of the client of a high protection.
The treatment process was as follows: 1 - Clean the surface.
The surface to be treated should be clean and free waste. In this case, the material comes directly from the marble works, so we proceeded to the elimination of any particle of dust and grime with a clean cloth. It protected surrounding areas with masking tape to avoid contact with the product.
The surface to be treated should be clean and free waste. In this case, the material comes directly from the marble works, so we proceeded to the elimination of any particle of dust and grime with a clean cloth. It protected surrounding areas with masking tape to avoid contact with the product.
2 - Apply the first coat of Porcelain Sealer. With a hand sprayer, apply Porcelain Sealer until the top has a mirror look wet for at least 5 seconds , generously saturating the surface. After extending the product with a roller to ensure that the entire surface is covered, allow its absorption during 10 minutes.
3 - Elimination of the surplus. After 10 minutes , removes excess product with a clean dry cloth, polishing the surface well.
4 - Applying the second coat of Porcelain Sealer. proceeds to apply a second coat of the product, following the procedure described above. Once saturated the surface becomes wait 10 minutes to allow absorption .
5 - Elimination of the surplus. After 10 minutes the , re-polish the surface with a cloth, removing any of the product to prevent polymerization.
After the process, the top maintains its original appearance, and ensures protection superior to water based stains and oil. 
0 comments:
Post a Comment